
Add to Cart
Shoulder Physical Cold Compression Therapy Machine Equipement
Traditional ice packs or cold pads cover only a portion of the shouder, this shouder wrap appliable to EverCryo cold compression therapay equipment covers your whole shoulder, and a longer cold therapy with compression is applied. The Cold Compression Therapy Machine Equipement integrates cold and compression functions, helps to reduce post-operative swelling or sports injuries.
The cooler is filled with special thermal insulation foam among the cavity to prevent heat entering and cold loss. Decompression valve is designed for a safer operation. The optional pneumatic pump enables automatic cold and compression therapy, you will be freed from cooler lifting.
Simplicity in design, easy to use, while efficient in treatment.
Item Name: | Shoulder cold compression therapy machine system |
Item No.: | B2-M |
Color: | Blue |
Logo: | Can be customized |
Material: | PVC velvet laminate |
Feature: | 1. Easy-to-use operation for clinic and home care, are reuseable ,no danger of tissue damage |
2. Improved the patient's compliance and tolerance, especially for elder patients. | |
3. Widely used in clinical, It can be used for hot and cold therapy. | |
4. The use of more secure and convenient for hospital, school, sports teams and so on. | |
5. 10 different types for each body part. |
Operation:
1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.
to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.
2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.
3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.
4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.
Care & Storage:
water with mild detergent, Lysol, 70% isopropyl alcohol, or hydrogen peroxide). Water chamber can be cleaned by filling the control unit one-third full with hydrogen peroxide (off the shelf) and running the system for five minutes. Outer sleeves are hand or machine washable. When not in use, fold or roll the wrap(s). To prevent mold or mildew growth, do not store in enclosed plastic containers.
Special Notes:
Whether used hot or cold, it is advisable to check that the temperature is not too extreme against the skin. It is recommended that the pack is wrapped in cloth before applying to skin.